Thermal Analyzer NETZSCH STA 449 F1 Jupiter PDF Print

Simultaneous thermal analysis (STA) combines the methods of differential scanning calorimetry (DSC) and thermogravimetry (TG) in one investigation.
With the help of STA simultaneous measurements of thermal effects and mass change of the sample in completely identical conditions are being held.
Scope of STA - metals, alloys, composite materials, plastics, rubber, fibers, coatings, ceramics, glass, building materials, medicines, food and so forth.

Center for collective use of scientific devices

 

The main provisions of the Center for collective use of scientific devices Center of Thermal Analysis

 

Center for simultaneous thermal analysis (hereinafter - the Center) was established on the basis of physical and technological institute of metals and alloys, NAS of Ukraine to the most efficient use of the unique and precious modern simultaneous thermal analyzer [link] STA 449 F1 Jupiter firm NETZSCH Germany. [http://www.ptima.kiev.ua/PICTURES/STA449_new-rus.pdf]
Simultaneous thermal analysis (STA) combines the methods of differential scanning calorimetry (DSC) and thermogravimety (TG) in one investigated. With the help of STA measurements of thermal effects and mass change of the sample in completely identical conditions are being held. Scope of STA - metals, alloys, composite materials, plastics, rubber, fibers, coatings, ceramics, glass, building materials, medicines, food and so forth.

 

 

Specifications of thermo analyzer STA 449 F1 Jupiter:
- Temperature range, º C - 20...1500;
- Heating and cooling rate, K/min - 0.01...50;
- Weighing range, mg - 0.0001...5000;
- Atmosphere - inert, oxidation, restoration static or dynamic;
- Accuracy of temperature measurement, % - +/- 0.25, but not more than 1.5 K;
- Precision measurement of temperature on metal samples, K - +/- 0.3;
- Noise DSC, mV - 0.05;
- Sensitivity DSC, mV/mW - 0.4...15 (depending on sensor);
- Measuring range entalniy, J/g - 1...30000;
- Accuracy entalpiy, % - +/- 3.

 

Restrictions on the research:
1. Can not be analyzed chemically active substances that can damage the appliance. These materials also include alloys based on magnesium, zinc and other metals that are noticeably evaporating in vacuum and inert atmosphere;
2. In the case of experiments with liquid metals and alloys must take into account their possible interaction with the crucible material;
3. Permanent employment of expensive consumables - high-purity gases, crucibles, standard samples.

 

According to the provisions of the Center for collective use, as contained in the order of the Presidium of NAS of Ukraine 322 from 28.04.2004, the "Sync Center Thermal Analysis" PTIMA NAS of Ukraine can guarantee a free service for other organizations, NAS of Ukraine only with the cost of materials listed in delivery device. The order of service (according to Decree of the Presidium of NAS of Ukraine 322 of 28.04.2004):

  1. Scientific institutions and organizations of the NAS of Ukraine, who are in need of research on scientific equipment of the Center (hereinafter - Customer), twice a year to 15 January and before 15 June submit in writing to the Bureau of Physical-Technical Problems of Materials Science of Ukraine its application the number of hours, dates and types of research, which requires the use of scientific instruments and equipment of the Center.

  2. 2. Bureau of Physical-Technical Problems of Materials Science of Ukraine on submission of the Director PTIMA NAS of Ukraine approves the overall distribution of customers working time allocated for collective use of scientific equipment of the Center.

  3. 3. PTIMA Director of the National Academy of Sciences of Ukraine issued the order, approved by the Bureau of Physical-Technical Problems of Materials Science of Ukraine
    determines the schedule of the Center determines the required number of shifts in time, taking into account the mode of operation of scientific institutions and scientists of the NAS of Ukraine needs to use scientific instruments Center.

  4. 4. When planning the time of the Center should proceed with such distribution: to work in one shift (8 hours working time) 3 hours provided for the needs of PTIMA Academy of Sciences of Ukraine, 3 hours is free for customers - and other scientific institutions and organizations of the NAS of Ukraine, 2 hours allowed to paid for use of facilities of the Center to other agencies, businesses and organizations that are not in the disposal of NAS of Ukraine, in accordance with the law. Using the time of the scientific equipment recorded in the workbook.

  5. 5. Paid services to use scientific equipment of the Center for the needs of other customers are provided on a contractual basis in accordance with the laws of Ukraine.

 

 

 

Contact telephones:

+3 (8044) 452-97-36 Shumihin V.S.

+3 (8044) 424-10-65 Scheretsky O.A.

< Prev   Next >

 
 
Language
EnglishRussianUkraine
We have 80 guests online